Xerox P8EX User Guide
28 • Chapter 2
2-4-4
Using RCP for DOS
To start the Remote Control Panel for DOS, type dosrcp at the DOS
prompt, then press Enter.
prompt, then press Enter.
The Remote Control Panel for DOS is somewhat different than that for
Windows. If you change any item in the Remote Control Panel for DOS,
you must send it to the printer by selecting the Send settings to printer
item in the File menu.
Windows. If you change any item in the Remote Control Panel for DOS,
you must send it to the printer by selecting the Send settings to printer
item in the File menu.
Quality
Density
Determines the overall density of the printed image.
Econo Mode
Determines the toner quantity to use when printing. If
this mode is set to ON, the printer conserves toner
when printing. The default value is OFF, which
provides 100% usage.
this mode is set to ON, the printer conserves toner
when printing. The default value is OFF, which
provides 100% usage.
Test
Configuration List
Prints the current printer configuration.
Demo List
Prints a demonstration page showing the main
features of the printer.
features of the printer.
Tab
Parameters
Description