Xerox 2135DT User Manual
36
Phaser 2135 Color Printer
Automatic 2-Sided Printing From the
Paper Tray
Automatic 2-sided printing is available from all trays; it is not
available from the Multi-Sheet Bypass Feeder. To use automatic
2-sided printing, the duplex option must be installed in the printer.
2-sided printing, the duplex option must be installed in the printer.
For best results with 2-sided printing, use 90 g/m
2
(24 lb. bond) laser
paper.
Automatic 2-sided printing is available for all paper sizes except A6.
Use only plain paper or heavy paper. Paper weight must be between
75-120 g/m
75-120 g/m
2
(20-32 lb. bond).
Note
See Manual 2-Sided Printing (page 39) for information about
duplexing heavier paper weights.
duplexing heavier paper weights.
For best results with automatic 2-sided printing, do not use heavy
toner coverage on the even-numbered pages of your print job.
toner coverage on the even-numbered pages of your print job.
Caution
Use only laser bond paper for automatic 2-sided printing in
the Universal Tray. Do not use any specialty media (such as
the Universal Tray. Do not use any specialty media (such as
glossy coated paper) to print automatic 2-sided printing.
Damage caused by using unsupported media for 2-sided
printing is not covered by the printer’s warranty.
printing is not covered by the printer’s warranty.
■
Load 75-120 g/m
2
(20-32 lb. bond) paper in the Universal
Tray.
■
The front side is face-up in the tray.
2-
Si
de
d Pr
ints