Xerox 200e User Manual

With this menu, you can conÞgure printer-speciÞc parameters.

Print server name

Name for print server portion 
of printerÕs NetWare interface

Any valid NetWare print server 
name

Ethernet frame 
type

Ethernet frame type for packet 
transmission

Adaptive*
DIX Ethernet II
IEEE Ethernet 802.3
IEEE Ethernet 802.2
IEEE Ethernet SNAP

Queue scan 
interval (sec)

Interval (in seconds) to scan 
queues

1 Ð 3600 seconds

Error notiÞcation**

Enable/disable notify list

Enable
Disable

ConÞguration 
server

File server to search for 
conÞguration Þle

Any valid NetWare Þle server

Login password

Password used when logging 
in to a Þle server

Any valid unencrypted password 
(limited to 47 characters)

ConÞgure queues

Allows conÞguration of queues 
for selected printer to service.

Can select, add, or delete 
queues from the list

Reset print server

Resets print server portion of 
printerÕs NetWare interface

*If the frame type is set to Adaptive, the printer uses the frame type of the Þrst Þle 
server that responds to a broadcast from the printer.  The printer broadcasts packets in 
the following order: IEEE Ethernet 802.3, IEEE Ethernet 802.2, DIX Ethernet II, IEEE 
Ethernet SNAP.  The new frame type is not used until the print server or printer is reset.

**If you enable error notiÞcation, you must create a notify list using the Notify list 
command in the ConÞgure print server (File Server) menu.