Xerox 2135 User Guide

Setting a TCP/IP Address

Your Phaser 2135 printer can be set up on a variety of TCP/ IP networks. There are several 

ways in which your printer can be assigned a TCP/IP address depending on your network.

■

Static Addressing TCP/IP address is assigned manually by the System Administrator.

■

Dynamic Addressing BOOTP TCP/IP address is assigned automatically by the Server.

■

Dynamic Addressing DHCP (Dynamic Host Resolution Protocol) TCP/IP address is 

assigned automatically by the Server.

For setting a TCP/IP address, refer to the Phaser 2135 Color Printer Quick Network Install 
Guide. Determine which method is appropriate to use for your network and follow the 
steps of the procedure.

Setting up AppSocket

To enable or disable the AppSocket protocol, perform the following steps:

Press Menu Up or Menu Down until you see:

Press Item Up or Item Down until you see:

Press Value Up or Value Down until you see:

Press Enter. You should see:

Press On Line. You should see:

=