Xerox 300x User Manual

To correct the head convergence:

Press the 

 button to make a test print.  

Examine the head convergence test patterns on the test print.

When the 

Ready

 message appears in the front panel, press the 

 button to enter Utilities mode and adjust the head 

convergence.  You see this message (

Vx.xx

 is the software version 

number):

Utilities    

Vx.xx

Exit         Next

Press the 

 button several times until the Head 

convergence message appears in the front panel.  (In this example, 

nn

 represents the current setting.)

Head convergence   <

nn

>

Change             Next

Press the 

 button to change the settings for 

the head convergence.  The choices, in increments of 1/4-pixel, 
are 0, +1, +2, +3, +4, –4, –3, –2, –1, and 0. 

In the following example, select a higher number than the current 
setting to move the center line to the right.  For example, if the 
current setting is 0, select +1. 

8344RN-4

+

- -