Xerox 300x User Manual
7
Front and Rear Panels
7-6
Phaser 300X Color Printer
Rear-panel LED indicator
The Phaser 300X has a single rear-panel LED that blinks to indicate that the
printer’s controller is operational. If the LED is not blinking after power-up
and printing the first page call Customer Support (1-800-835-6100 in the
United States), or your local Tektronix office (outside the U.S.). Refer to “If
you need help” on page 6-1.
printer’s controller is operational. If the LED is not blinking after power-up
and printing the first page call Customer Support (1-800-835-6100 in the
United States), or your local Tektronix office (outside the U.S.). Refer to “If
you need help” on page 6-1.
a. The demo page prints out at restart and power-up; however, if diagnostics senses an error
during power-up, the startup page will be printed regardless of the switch settings.
Switches 2, 3, and 4: Diagnostics
Switch 2
Switch 3
Switch 4
Function
Down
Down
Down
Default, normal operation
Down
Down
Up
Prints a configuration page
Up
Down
Up
a
Demo page replaces the startup page
Switches 8 and 9: Color Correction Mode
Switch 8
Switch 9
Function
Down
Down
No color correction
Down
Up
SWOP Press (matches output of a web offset press)
Up
Down
Vivid Blue
Up
Up
Use NVRAM (default setting is Euroscale Press)