Xerox 300x User Manual
Getting Set Up
2
User Manual
2-5
Installing the output tray
1.
Push the output tray into the lower slot until it clicks into place.
2.
Fit the rear tab into the slot inside the printer. The tabs on the
sides of the tray fit into the slots on the sides of the printer.
sides of the tray fit into the slots on the sides of the printer.
If you need to remove the tray, press in on both sides of the tray
next to the tabs while you pull out the tray.
next to the tabs while you pull out the tray.
2
8873-02
2