Xerox 300x User Manual

 

The printer uses a 1284C-compliant high-density parallel connector for 
connection to parallel devices.  A parallel cable adapter, included with the 
printer, converts a standard 36-pin low-density parallel cable plug to a 
36-pin high-density plug.  The adapter is used when connecting a standard 
Centronics parallel cable to the printer’s high-density parallel connector.  
Parallel cables are available from Tektronix; refer to “Interface cables and 
Ethernet adapters” on page 4.

Connect a parallel interface cable to your computer and to the 
printer’s parallel port. 

If you have no other connections to make, read ahead to “Turning on the 
printer” on page 2-13.

If your computer is a PC:  After you turn on the printer and 
install software on your PC, you must set up your PC’s parallel 
port to match the settings you have selected for the printer’s 
parallel port.  Refer to “Installing software on your computer” on 
page 17 for Windows or “Setting up PC ports (DOS)” on 
page 2-18 for DOS.

8873-22

Reset

Extended

Power Up

Run

Metric

American

Variable

1200

Skip

Run

Off     Off

Blue  Press

LocalTalk™

PXi