Xerox 300x User Guide

Use the Send Profile dialog box to send a profile to the printer to change the 
printer’s default color profile.  

For Phaser 480X, Phaser 450, and Phaser 300X printers:  
Make sure DIP Switches 8 and 9 on the printer’s rear panel are in 
the up position.  (This step is not necessary for Phaser 600 
printers.)

Select Send Profile from the File menu.  

From the list, select the profile you want sent to the printer.

Click OK to send the selected profile to the printer.  

When a standard profile, such as SWOP Press or Commercial Press, is sent to 
the printer, it remains in the printer’s memory as the printer’s default color 
profile until it is replaced with another standard profile.  The standard 
profile remains in the printer’s memory even if the printer is turned off.

However, a user-modified profile remains in the printer’s memory as the 
printer’s default color profile only while the printer is turned on.  If the 
printer is turned off, then on again, the default profile in the printer is the 
standard or “based-on” profile that was used for the user-modified profile; 
the user-modified information is lost.  For example, if a user-modified profile 
that started with Commercial Press as the “based-on” profile, is sent to the 
printer, only the Commercial Press information is left in the printer’s 
memory after the printer is turned off.  Your original user-modified profile is 
still intact and available for use, but it must be sent to the printer again.

This downloading procedure does not affect a profile you may be editing in 
PhaserMatch.