Xerox 300x User Guide
Calibrating the Printer
3
User Manual
3-15
Adjusting calibration curves
Note
The Calibration Curves command is available only in the Expert
Calibration user mode. Refer to page 2-9 for instructions on
selecting this user mode.
Calibration user mode. Refer to page 2-9 for instructions on
selecting this user mode.
Calibration Curves is an advanced function for users who want more control
over adjusting the tone reproduction curve for each color on the transfer roll.
Any changes made in this dialog box modify or fine tune the settings made
in the Gray Balance and Gray Linearity dialog boxes.
over adjusting the tone reproduction curve for each color on the transfer roll.
Any changes made in this dialog box modify or fine tune the settings made
in the Gray Balance and Gray Linearity dialog boxes.
Caution
Be careful when using this function; setting calibration curve
adjustments too far from nominal values may distort color
characteristics for
adjustments too far from nominal values may distort color
characteristics for
all printing modes.
Use the Calibration Curves dialog box to do the following:
■
Edit the printer’s calibration values at different points for each
color on the transfer roll, or reset all values to the nominal default.
color on the transfer roll, or reset all values to the nominal default.
■
Adjust the density of each primary color to correct color shifts.