Xerox 300x User Guide
Editing Profiles
4
User Manual
4-25
Sending a profile to the printer
Note
The Send Profile command is available only in the Expert
Calibration user mode. Refer to page 2-9 for instructions on
selecting this user mode.
Calibration user mode. Refer to page 2-9 for instructions on
selecting this user mode.
Use the Send Profile dialog box to send a profile to the printer to change the
printer’s default behavior.
printer’s default behavior.
1.
Use the profile currently in your computer’s memory, or load a
profile to send to the printer.
profile to send to the printer.
a.
Select Load Profile from the File menu.
b.
Select a profile to load, and click OK.
1.
Select Send Profile from the File menu.
2.
In the Send Profile dialog box, click OK to send the currently
loaded profile to the printer. The profile remains in the printer’s
memory until it is replaced with another profile.
loaded profile to the printer. The profile remains in the printer’s
memory until it is replaced with another profile.
This profile is used if you select Use Printer Setting as the color
correction in the Tektronix driver for your printer, or when you
use a non-Tektronix driver.
correction in the Tektronix driver for your printer, or when you
use a non-Tektronix driver.