Xerox 4510 Supplementary Manual

This section includes:

■

■

■

■

■

■

The Tray 1 Mode and Tray 2-N Mode setting define the printer’s media handling behavior to 
better fit the kind of printing you want to do. Two modes determine how paper size and type 
are set for Tray 1 and for Trays 2-N, and which tray is used if you do not select a specific tray:

To select the tray mode setting, use one of the following options:

■

The printer’s control panel

■

CentreWare IS

To select a Tray 1 Mode or Tray 2-N Mode setting on the control panel:

Select 

, and then press the OK button.

Select 

 or 

, and then press the OK button.

Select the appropriate setting, and then press the OK button.

To select a Tray 1 Mode or Tray 2-N Mode setting using CentreWare IS:

Launch your web browser.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

Click Properties.

Select the General folder on the left navigation panel, and then select Printer Defaults.

(Factory default for 
Tray 1 Mode)

The dynamic setting prompts the printer to search the trays to find the paper 
size and type to match your print job. If no size and type matches are found 
and the media size and type have not been configured at the printer’s control 
panel, the printer will print from the highest priority unconfigured tray and set 
the paper type and size from the print job. The default tray priority is Tray 2, 3, 
4, and then 1.

(Factory default for 
Tray 2-N Mode)

The static setting enables the user to select the paper size and type settings 
for the trays using the Paper Tray Setup menu option on the printer’s control 
panel. To print from a tray, the paper size and type of your print job must match 
the tray’s paper size and type settings on the control panel.