Xerox 4510 User Guide
IPv6
Phaser® 4510 Laser Printer
2-18
Manual Address Assignment
Enter an IPv6 address manually to add it to any other IPv6 addresses. To create a manual
address, enter the IPv6 address and prefix length in the fields provided in CentreWare IS. The
default prefix length is 64.
address, enter the IPv6 address and prefix length in the fields provided in CentreWare IS. The
default prefix length is 64.
To manually set the IPv6 address, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Setting the IPv6 Address with the Control Panel
To set the IPv6 address on the control panel:
1.
Select
Printer Setup
, and then press the OK button.
2.
Select
Connection Setup
, and then press the OK button.
3.
Select
Network Setup
, and then press the OK button.
4.
Select
TCP/IPv6 Setup
, and then press the OK button.
5.
Select
Manual Address
, and then press the OK button to turn manual addressing on.
6.
Select
Manual Address
, and then press the OK button.
7.
To set the address:
a.
Press the Up Arrow and Down Arrow buttons to set the first number, and then press
the OK button.
the OK button.
b.
Continue setting individual numbers; press the OK button after each selection. When
you are finished adding numbers for the address, press the OK button to return to the
menu.
you are finished adding numbers for the address, press the OK button to return to the
menu.
Setting the IPv6 Address Using CentreWare IS
To manually set the IPv6 address using CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s Address field.
3.
Click Properties.
4.
Select the Protocols folder on the left navigation panel, and then click TCP/IP.
5.
Click the TCP/IP (v6) button.
6.
In the Manual Address Assignment field, select Use this address, and then type the
address.
address.
7.
Click the Save Changes button at the bottom of the page.