Xerox 750P Installation Instruction

Job is serviced, but does not print

■

Check the PhaserShare Administrator Printer Info dialog box for reported error 
conditions.  

■

Download the PostScript Error Handler to the printer.  For information on using the 
Tektronix PostScript Error Handler, see your printer’s user documentation.

■

Use the correct Tektronix driver for your printer.

■

Verify that the Print Server protocol is enabled; use the printer’s front panel or check 
the Administrator’s Print Server tab.

■

Banners, form feeds, and tabs may interfere with the print job.  Try disabling these.

Setting IPX frame types from the Phaser 750 front 
panel

When the front panel displays 

 press the Menu button.

Press the right-arrow (---->) button until Configuration is displayed.  Press the Menu 
button.

Press the right-arrow (---->) button until Network Settings is displayed.  Press the 
Menu button.

Press the right-arrow (---->) button until NetWare is displayed.  Press the Menu 
button.

Press the right-arrow (---->) button until IPX Frame Type is displayed.  Press the 
Menu button.

Press the right-arrow (---->) button until the desired frame type is displayed.  Press the 
Menu button.

Press the right-arrow (---->) button to display On or Off.  Press the OK button.

You are returned to the Frame Types menu; to set another frame type, repeat Steps 6 
and 7, or go on to Step 9 to return the printer to normal operation.

To return the printer to normal operation, press the Exit button (the left-most button) 
until the front panel displays Ready.