Xerox 750P Installation Instruction

When two or more IP address methods are used simultaneously, the printer uses 
the first address that it successfully obtains. 

Information needed for IP addressing   

Setting the IP address from the Phaser 750 front 
panel

When the front panel displays 

 press the Menu button.

Press the right-arrow (---->) button until Configuration is displayed.  Press the Menu 
button.

Press the right-arrow (---->) button until Network Settings is displayed.  Press the 
Menu button.

Press the right-arrow (---->) button until TCP/IP is displayed.  Press the Menu button.

Set the IP address:

Press the right-arrow (---->) button until TCP/IP Address is displayed.  Press the 
Select 

button.

Press the right-arrow (---->) button to highlight the part of the address that you 
want to set.  Press the + button to change the numbers.

When the address is correct, press the Set button.

Press the Confirm button.

Internet (IP) address for 
the printer

Format is x.x.x.x, where x represents a decimal number 
from 0 - 255.

Network mask

If you are unsure, leave this blank; the printer will 
choose an appropriate mask.

Default Router/Gateway 
address

Router address.  You need this address if you want to 
communicate with the printer from anywhere other 
than the local network segment.  

Broadcast address

This is the address the printer uses to 

 broadcast 

packets.  Regardless of how this parameter is set, the 
printer 

 broadcast packets from any of the 

commonly used broadcast address conventions. 

It should not be necessary to set this address, because 
the printer calculates it automatically.  However, you 
can override the default setting.