Xerox 750P Installation Instruction
Networking Setup Guide
3
Connecting Your Printer to a Network
Connecting Your Printer to a Network
Direct Ethernet Connection to Macintosh or PC
Requirements
■
Two RJ-45, twisted-pair, 10Base-T cables
■
An Ethernet-port hub
Procedure
1.
Turn off your computer and the printer.
2.
Connect one end of an Ethernet cable to the Ethernet port on your computer. Connect
the other end to the hub.
the other end to the hub.
3.
Connect the other cable to the hub and the Ethernet port on the printer.
4.
Turn on your computer and printer.
After the computer and printer are connected, refer to the configuration instructions for
your network type.
your network type.
Note
The printer is not a SCSI device. Do not connect the printer to your
computer through the SCSI ports.
computer through the SCSI ports.
3094-73