Xerox 750P User Guide

Media hints

Use high-grade media. For best reliability and image-quality, always use Tektronix media. 
Refer to the printer’s User Guide for ordering information. Do not use media designed for 
inkjet printers; it may damage the Fuser. 

Media handling

■

Make sure that the media is dust-free. Dust and dirt can result in poor print quality.

■

Handle media with both hands at the edges to avoid creases and fingerprints.

■

Store media in the original, dust-free package in the same environmental conditions 
as the printer. 

Double-sided printing

■

Automatic Duplex. Use laser paper that is between 75 - 90 g/m

2

 (20 - 24 lb. bond) for 

opacity and feed reliability. 

■

Manual Duplex with the Multi-Purpose tray. Depending on the stiffness and 
smoothness of your laser paper, the printer handles paper up to 105 g/m

2

 (28 lb. 

bond). Buy a small amount first and try it.

■

Manual Duplex with specialty media. For two-sided printing on specialty media 
(card stock and Tektronix glossy coated paper), only use the Multi-Purpose Tray. This 
is intended for occasional use only.

■

Duplex printing can reduce the life of the printer’s components and may require more 
frequent printer cleaning.

If your printer has an Automatic Duplex/Lower Tray Assembly 
installed

■

Always place the Duplex Unit into the printer’s upper slot.

■

Insert the 

TRANSPARENCY

 tray in the printer’s middle tray slot.

■

Place the most frequently used paper in the 

PAPER

 tray and insert the tray in the 

printer’s lower tray slot.

Specialty media

■

Always load specialty media (envelopes, Tektronix Laser Labels, Tektronix Glossy 
Coated Paper, Tektronix Card Stock, and heavy paper) in the Multi-Purpose Tray.

■

Always set the Media Thickness Switch according to the media being used. Refer to 
the Phaser 750 User Guide for instructions.

■

When printing labels or envelopes, make sure that you use only the recommended 
types.

■

Printing on specialty media can reduce the life of the printer’s components and may 
require more frequent printer cleaning.