Xerox 7750 Supplementary Manual
Custom Size Paper
Phaser® 7750 Color Laser Printer
2-71
Tray 1 (MPT)
The arrow on the width guide, displayed in the following graphic, must line up with one of
three positions identified on the labeled area next to the width guide. Push firmly to move
the width guide so that the arrow points to the correct position for the paper size you are
using:
three positions identified on the labeled area next to the width guide. Push firmly to move
the width guide so that the arrow points to the correct position for the paper size you are
using:
■
SRA3 (displayed in a black field): Do not use this setting for custom size printing.
■
12” (displayed in a gray field): Use this setting for paper widths of 11.75 in.-12 in.
(298 mm-305 mm)
(298 mm-305 mm)
■
All other sizes (indicated by a black arrow)
Tray 2
Adjust the paper guides according to the paper size and orientation (long-edge feed or
short-edge feed). Labels inside the paper tray provide additional information for loading
paper according to size and orientation.
short-edge feed). Labels inside the paper tray provide additional information for loading
paper according to size and orientation.
7750-167
7750-092