Manualsbrain.com
  1. Manuals
  2. Brands
  3. Xerox
  4. 740
  5. User Guide

Xerox 740 User Guide

Download
Page of 186
PhaserShare Networking Manual
63
TCP/IP Printer Configuration (All Platforms)
7
Setting IP parameters:  Phaser 360 printer front panel 
N 
O
 
T
 
E
When you set the IP addressing parameters from the front panel, the front panel 
selections for DHCP/BOOTP and RARP are automatically set to Disabled.
1.
Press the 
Menu
; the front panel displays  
Help Pages
.   
2.
Press 
---->
 or 
<----
 until the front panel displays 
Network Settings
.
3.
Press 
Menu
 until the front panel displays 
TCP/IP
.
4.
To set the IP address:
a.
Press 
Menu
 again; the front panel displays 
Enable Interface
.
b.
Press 
---->
 until the front panel displays 
TCP/IP Address
.
c.
To display the IP address, press 
Menu
.  For example:  
d.
To set the left-most digit of the address, press 
Increment
.
e.
To advance to the next digit, press 
Shift
.   To set this digit, press 
Increment
.
f.
To set the remaining digits, press 
Shift
 and 
Increment
 as described 
in Step e.
g.
When the address is correctly set, enter your settings into the printer by 
pressing 
Select
; the front panel displays:       
h.
Press 
Confirm
; the front panel briefly displays 
Selected
, then 
displays the IP address again.  The IP address is now set in the printer.
i.
To return to the menu of IP addressing parameters, press 
Exit
.
N 
O
 
T
 
E
When you are in the menu, if the front panel is not used for 5 minutes, the 
printer returns to 
Ready
.
    000.000.000.000
    Increment   Shift    Select 
N 
O
 
T
 
E
Setting the IP address to 000.000.000.000 causes the printer to use Dynamic 
Address Resolution to set its IP address (see “Setting IP parameters: RARP or 
BOOTP” on page 65).
    Confirm Selection
           Confirm
N 
O
 
T
 
E
When you press 
Confirm
 to set the IP address, the printer resets the network