Xerox 740 Installation Instruction
Novell NetWare Configuration
4
Setup Guide
27
Verify information and finish the configuration
After you have entered the configuration information, the Quick Configuration
Wizard displays the Configured Printer Information dialog box, which reports
the information you have entered.
Wizard displays the Configured Printer Information dialog box, which reports
the information you have entered.
1.
Verify that the information is correct.
■
If the information is correct, click Apply Changes.
■
If the information is not correct, click Back to return to previous
dialog boxes and correct the information. Click Next to return to
the Configured Printer Information dialog box. Click Apply
Changes
dialog boxes and correct the information. Click Next to return to
the Configured Printer Information dialog box. Click Apply
Changes
.
■
To exit the wizard and return to the Main window without making
any changes, click Cancel.
any changes, click Cancel.
2.
After you click Apply Changes, the printer resets; the changes take
effect when the reset is complete.
effect when the reset is complete.
For more information on NetWare configuration and troubleshooting, see the
PhaserShare Networking Manual on your printer’s CD-ROM.
PhaserShare Networking Manual on your printer’s CD-ROM.