Xerox 740 Installation Instruction

For UNIX environments, Tektronix offers PhaserPrint for UNIX software, which 
provides fast raster printing and a graphical user interface with push-button 
control of printer features.  For more information on PhaserPrint software, see 
the PhaserShare Networking Manual on the printer’s CD-ROM.

If you want to print using PhaserPrint for UNIX software, you must use 
PhaserPrint software to configure your host.  Refer to the PhaserPrint for UNIX 
user manual or the instructions provided with the PhaserPrint for UNIX 
CD-ROM for configuration information.  PostScript and PDF versions of the 
manual are available from the Tektronix ftp site: 

The printer’s internal LPR queue uses the BSD protocol; its known queues are 
listed in the following table.  These are the only remote queue names that the 
printer recognizes.  If you use another name, the printer automatically defaults 
to AUTO.       

Your printer model may not support all languages listed in the table.  See your 
printer’s user documentation for information on the supported languages.

As you set up a spool queue, you can use the PostScript utility files provided 
with your printer’s software to control printer features (for example, selecting 
upper or lower paper trays, or selecting print quality modes).  See your printer’s 
user documentation for more information on these utility files.

PS

PostScript

HPGL

HP-GL (Hewlett-Packard Graphics Language)

PCL

PCL (Printer Control Language)

AUTO

Automatic Language Selection (the printer automatically senses 
the language of the print job and processes it accordingly)