Xerox 740 Installation Instruction

Set up spool directories.  After you have edited the /etc/hosts and 
/etc/printcap files, create and set permissions for the spool directory you 
specified.  For example:

cd /usr/spool/lpd

mkdir colorprinter

chown daemon colorprinter

chgrp daemon colorprinter

chmod 770 colorprinter

Refer to your UNIX documentation for the correct command syntax for 
your workstation.

There are two steps to printer configuration:

Set the printer’s IP address and other addressing information.  The 
Phaser 740 and 780 printers support the use of IP host name as well as 
an IP address.  See Chapter 8, “Setting the Printer’s IP Addressing 
Parameters” for more information.

Set the printer’s other TCP/IP parameters (optional): 

■

Set host access and control-character filtering for each port.

■

Receiving printer status (Syslog, SNMP, or email notification).

For information on setting these TCP/IP parameters, see the 
PhaserShare Networking Manual on the printer’s CD-ROM.