Xerox 740 Installation Instruction
Setting the Printer’s IP Addressing Parameters
8
Setup Guide
55
8.
Return the printer to normal operation.
a.
Press
until the front panel displays
Network Settings
.
b.
Press
again.
■
If you have changed any parameters that require a printer reset
to take effect, you will be prompted to reset the printer. If you
press
to take effect, you will be prompted to reset the printer. If you
press
Reset
, the printer resets. If you press
Resume
, the front
panel displays
Network Settings
. Press
; the printer
returns to normal operation, but the changes you have made
will not take effect until the next time the printer is reset.
will not take effect until the next time the printer is reset.
■
If you have not changed any parameters that require a printer
reset to take effect, the front panel displays
reset to take effect, the front panel displays
Ready
.
Setting IP parameters: Phaser 780 printer front panel
N
O
T
E
When you set the IP addressing parameters from the front panel, the front
panel selections for DHCP/BOOTP and RARP are automatically set to
Disabled.
panel selections for DHCP/BOOTP and RARP are automatically set to
Disabled.
1.
While
Ready
is displayed, press
Select
; the
Printer
menu is
displayed:
Printer Menu
Help Pages Menu
2.
Press
or
until the front panel displays
Network
Settings
.
Printer Menu
Network Settings Menu
3.
Press
Menu
to enter the
Network Settings
menu;
Network
Settings
appears on the top line of the display
.
4.
If TCP/IP is not already displayed, press
until the front panel
displays
TCP/IP
.
5.
To set the IP address:
a.
Press
Menu
again; the front panel displays
Interface
.
b.
Press
until the front panel displays
IP Address
.