Xerox 740 Installation Instruction

After setting the printer’s IP address by one of the methods described 
previously in this chapter, you can perform the rest of the TCP/IP configuration 
using PhaserLink software, if you have a World Wide Web browser.  For more 
information on PhaserLink software, see Chapter 9, “PhaserLink Software: the 
Printer’s Information Link”.

From the printer’s home page, click Configuration; this displays the 
View and Configure Settings

 page.

From the View and Configure Settings page, click View and 
Configure Interface Settings

; this displays the View and Configure 

 page.

From the View and Configure Interface Settings page, click View and 
Configure TCP/IP Settings

; this displays the View and Configure 

 page.    

Enter your printer’s settings.  If you make an error, click Restore Initial 
Form Values

 and start again.

When you are finished entering the settings, enter the Validation 
Password

 (if one has been set) and click Do/Apply. 

The printer responds by displaying a dialog box that allows you to 
reset the printer.  The new parameters will not take effect until the 
printer is reset.

The printers support Domain Name Services (DNS) through an embedded DNS 
stub resolver.  The DNS resolver protocol communicates with one or more DNS 
servers to request the IP address for a given host name or the host name for a 
given IP address.  

To use an IP host name for the printer, the system administrator must have 
already configured one or more DNS servers and a local DNS domain name 
space data base.