Xerox 7400 User Guide

This section includes:

■

■

■

■

■

For information about printing on other types of specialty media, see the 
Advanced Features Guide at 

Transparencies can be printed from Tray 1 (MPT) and Tray 2. They should be printed on one 
side only.

For best results, use only transparencies that are recommended for your printer. For more 
information, see the Recommended Media List at 

To order paper, transparencies, or other specialty media, contact your local reseller or go to 

.

Damage caused by using unsupported paper, transparencies, and other specialty 

media is not covered by the Xerox warranty, service agreement, or Total Satisfaction 
Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada. 
Coverage may vary outside these areas; please contact your local representative for details.

■

Remove all paper before loading transparencies in the tray.

■

Do not load more than 50 transparencies in Tray 1 (MPT). Do not load more than 
200 transparencies in Tray 2. Overloading the tray may cause the printer to jam.

■

Handle transparencies by the edges using both hands to avoid fingerprints and creases, 
which can cause poor print quality.

■

After loading the transparencies in the tray, use the control panel to change the paper type 
to 

.