Xerox 4510 User Manual

To add or edit traps for SNMP v1v2c:

On the SNMP Configuration page: Click the Configure SNMP v1v2c button, and then 
click the Configure Traps button.

The Configure Traps page lists the current Trap Destination Addresses for the SNMP 
protocol. 

■

The Address column lists the Trap Destination IP address or DNS Name. 

■

The Version/Type column lists the SNMP Trap version or Inform Request for sending 
to the specified trap address. SNMP Trap versions include SNMP v1 Traps, SNMP 
v2c Traps, and SNMP v2c Inform Requests. 

■

The Traps column lists the types of traps to send to the Trap Destination Address. 
Traps to be received include Printer Traps, Job Monitoring Traps, Cold Start, and 
Authentication Traps.

Do one of the following:

■

To add traps for SNMP v1v2c, click the Add Destination button, and then go to 
Step 3.

■

To edit the settings for a Trap Destination Address, click the corresponding 
Edit button, and then go to Step 3.

■

To delete a Trap Destination Address, click the corresponding Delete button.

To add or edit a Trap Destination IP Address, click the IP Address radio button, and then 
enter the IP Address in the fields.

To add or edit a Trap Destination DNS Name, click the DNS Name radio button, and then 
enter the DNS Name in the field.

For a non-standard UDP port, enter the UDP Port Number in the field.

Select the SNMP trap version to send to the specified address. SNMP versions include 
SNMP v1 Traps (default), SNMP v2c Traps, and SNMP v2c Inform Requests. 
SNMP v1 Traps is the default.

Enter the community name of the destination device in the Community Name field.

For Traps to be received, select the check boxes of the different types of traps to send to 
the specified address. Traps to be received include Printer Traps (default), Job Monitoring 
Traps, Cold Start Traps, and Authentication Traps. At least one trap type must be selected.

Click the Apply button to save the changes.