Xerox 790DP User Guide
Setting up the Printer Cabinet
1. Setting up the Phaser 790
Xerox Phaser 790 Getting Started
1-5
Setting up the Printer Cabinet (optional)
If you ordered the Printer Cabinet, perform the following steps. If you did not
order the Printer Cabinet, go to the
order the Printer Cabinet, go to the
Installing the 2 Tray Module
procedure.
You will need a phillips screwdriver in order to perform this procedure.
1.
Open the carton containing the Printer Cabinet and ensure that you have
received the following items:
received the following items:
•
Bottom panel with four casters
•
Top panel containing many holes
•
Rear (small) panel
•
Left side panel with hinge attachments on inside front edge
•
Right side Panel without hinge attachments
•
Two hinges
•
Four wood screws
•
12 large screws
•
Two locating pins
•
One u-shaped locking bracket
2.
Locate the bottom panel and lock the four casters.
0301242A -W O L