Xerox 790DP User Guide
Unpacking the Printer
1. Setting up the Phaser 790
Xerox Phaser 790 Getting Started
1-13
Unpacking the Printer
Read all the steps before performing this procedure. There are decisions to
make before removing the Printer from the packing.
make before removing the Printer from the packing.
1.
Remove the four cardboard supports and the Styrofoam packing from
the top of the Printer.
the top of the Printer.
2.
Remove the cardboard tray from the top of the Printer and place in a
safe place, out of the way of the installation.
The cardboard tray contains the following items:
safe place, out of the way of the installation.
The cardboard tray contains the following items:
•
One Copy/Print Cartridge box
•
Four Dry Ink boxes (Yellow, Cyan, Magenta, and Black)
•
CD package containing two CDs
•
Getting Started Guide
•
Recommended Materials List
•
Power cord
•
Output Tray
3.
Pull the plastic wrap that is around the Printer, down around the pallet
and away from the bottom of the Printer.
and away from the bottom of the Printer.
4.
Before lifting the Printer from the pallet, read all the Warnings and
Cautions starting below and continuing on the next page.
Cautions starting below and continuing on the next page.
WARNING
The Printer weighs 153 pounds (69.5 kg) without the dry ink or print/copy
cartridges installed. ALWAYS USE FOUR PEOPLE TO LIFT THE
PRINTER.
cartridges installed. ALWAYS USE FOUR PEOPLE TO LIFT THE
PRINTER.
Ensure that you keep the Printer LEVEL. Please note that the rear of the
Printer is heavier than the front.
Printer is heavier than the front.
301013b
REAR
FRONT