Xerox 790DP User Guide
Loading paper in the paper tray
1. Setting up the Phaser 790
Xerox Phaser 790 Getting Started
1-43
Moving the guides too tight against the paper stack can cause a jam.
7.
Ensure that the vertical Paper Guide is aligned with the appropriate
paper size mark on the bottom of the tray.
paper size mark on the bottom of the tray.
Automatic paper size detection cannot occur if the vertical Paper Guide is
out of position.
out of position.
8.
Push the paper tray firmly into the Printer.
301065b
9.
If there are additional paper trays installed in your Phaser 790, repeat
this procedure until all the trays are loaded with the desired paper stock.
this procedure until all the trays are loaded with the desired paper stock.
The next step
Go to the next section
Printing the Test Page
.