Xerox 790DP User Guide

Windows 2000 print drivers

3.  Network Setup

Xerox Phaser 790 Getting Started

3-7

1. 

Ensure that the Printer has been prepared for network printing.

2. 

Ensure you have the printer name, Apple Talk Zone (if applicable), and
IP Address. These may be obtained from your system administrator or
from the Configuration Page.
In order to print the Configuration Page, perform the following steps:

a. 

Press the Offline button on the Printer Control Panel

b. 

Press the Menu button until the message Print Pages from List is
displayed on the Printer Control Panel.

c. 

Pressthe  Item/Enter button in order to select Print Configuration
Page.

d. 

Pressthe  Item/Enter again button in order to print the page.

The following procedure provides the steps for installing the printer driver for
parallel port printing. For detailed information about setting up TCP/IP,
IPX/SPX, SPM, or SMB printing, refer to the 

 chapter.

1. 

Select Start, Settings, and Printers.

2. 

Double-click Add Printer and select Next.

3. 

Select Local printer and Next.

Ensure that the Automatically detect and install my Plug and Play
printer check box is not selected.

4. 

Select LPT1: Printer Port and Next.

5. 

Select Have Disk.

6. 

Insert the CD in the CD-ROM drive, type the name of the CD-ROM drive
(for example, D:\), and select Browse.

The Install From Disk dialog box prompts you for the disk.

7. 

Browse to the English\Prntdrvr\Ps_drvr\Win_2000 folder and ensure
that oemsetup.inf or oemsetup is selected.

8. 

Select Open.

9. 

Ensure that the path is correct and select OK.