Xerox 850 Installation Instruction

Novell NetWare

Configuration software for NetWare Networks

For Windows environments, the following software is available:

■

PhaserShare Administrator (Tektronix).  Use this application to configure the printer 
and the network when using NetWare 3.x and 4.x.

■

NWAdmin (Novell).  Use this utility to manage existing queues on networks running 
NetWare 4.x in NDS mode.

Printing the Configuration Page

Your printer’s Configuration Page reports information that you need for NetWare 
configuration.  For information on printing a Configuration Page, see The printer’s 
Configuration Page on page 2. 

On the printer’s Configuration Page, all zeros in one or more of the IPX Networks fields 
indicates that the printer does not recognize the network connection; this probably 
indicates a faulty cable connection, an incorrect frame type, or Reply to Get Nearest 
Server has not been set to on.  It must be set to on for at least one file server or router on 
the same segment as the printer. 

Installing the PhaserShare Administrator

The PhaserShare Administrator is on the printer’s CD-ROM.  A single integrated installer 
is used to install printer drivers, the PhaserShare Administrator, and other software.

Run the installer as described in Tektronix Installer for Windows on page 5.  

When prompted, make the following selections:

■

Select Custom Install.

■

When prompted to select the components and sub-components you want to 
install, check Net Admin. Support under Components, then check PhaserShare 
(NetWare) under Sub-components. 

■

To install the drivers and PPD files for your printer (recommended for first-time 
installations), check Drivers under Components, then check Printer Driver 
under Sub-components.