Xerox 850 Installation Instruction
Networking Setup Guide
23
Setting the Printer’s IP Address
Note
When two or more IP address methods are used simultaneously, the printer uses
the first address that it successfully obtains.
the first address that it successfully obtains.
Information needed for IP addressing
Setting the IP address from the Phaser 850 front
panel
panel
1.
When the front panel displays READY TO PRINT, press the up-arrow button until
Menu is highlighted. Press Select.
Menu is highlighted. Press Select.
2.
Press the down-arrow button until Printer Configuration is highlighted. Press Select.
3.
Press the down-arrow button until Network Settings is highlighted. Press Select.
4.
Press the down-arrow button until TCP/IP is highlighted. Press Select.
5.
Set the IP address:
a.
Press the down-arrow button until IP Address is highlighted. Press Select.
b.
Press the right-arrow button to highlight the part of the address that you want to
set. Press the up- or down-arrow buttons to change the numbers.
set. Press the up- or down-arrow buttons to change the numbers.
c.
When the address is set, press Select.
6.
Set the network mask:
a.
Press the down-arrow button until Network Mask is highlighted. Press Select.
b.
Press the right-arrow button to highlight the part of the address that you want to
set. Press the up- or down-arrow buttons to change the numbers.
set. Press the up- or down-arrow buttons to change the numbers.
c.
When the address is set, press Select.
Information
Comments
Internet (IP) address for
the printer
the printer
Format is x.x.x.x, where x represents a decimal number
from 0 - 255.
from 0 - 255.
Network mask
If you are unsure, leave this blank; the printer will
choose an appropriate mask.
choose an appropriate mask.
Default Router/Gateway
address
address
Router address. You need this address if you want to
communicate with the printer from anywhere other
than the local network segment.
communicate with the printer from anywhere other
than the local network segment.
Broadcast address
This is the address the printer uses to
send
broadcast
packets. Regardless of how this parameter is set, the
printer
printer
accepts
broadcast packets from any of the
commonly used broadcast address conventions.
It should not be necessary to set this address, because
the printer calculates it automatically. However, you
can override the default setting.
the printer calculates it automatically. However, you
can override the default setting.