Xerox 850 Installation Instruction
Networking Setup Guide
43
Disabling and Enabling Protocols
Disabling protocols: PhaserLink Printer
Management Software
Management Software
1.
Connect to the printer via PhaserLink (see Accessing the printer from a browser on
page 33).
page 33).
2.
On the left side of any PhaserLink page, click Settings.
3.
In the INTERFACES group, click the link for the protocol you want to disable; this
displays the page for that protocol.
displays the page for that protocol.
4.
At the top of the page is a field labeled with the name of the protocol; to disable the
protocol, select Disabled, then click Apply at the bottom of the page.
protocol, select Disabled, then click Apply at the bottom of the page.