Xerox 3100MFP User Manual

- 23 -

If you want, you can change the origin of the scanner.

By entering new values for X and Y in mm (X < 209 and 
Y < 280), you move the scanned area as shown on the 
diagram below.

1 Press  , enter 843 using the keypad.
2 Select the X and Y coordinates with the buttons 

or  .

3 Setup the desired coordinates with the numerical 

keypad or the buttons   and  .

4 Confirm your choice by pressing the OK button.

5 Exit this menu by pressing the 

 button.

The  CONTRAST parameter allows you to choose your 
output’s contrast.

1 Press  , enter 844 using the keypad.
2 Setup the desired level of contrast with the buttons 

 and  .

3 Confirm your choice by pressing the OK button.

4 Exit this menu by pressing the 

 button.

The  BRIGHTNESS parameter allows you to lighten or 
darken your output.

1 Press  , enter 845 using the keypad.
2 Setup the desired brightness with the buttons 

and  .

3 Confirm your choice by pressing the OK button.

4 Exit this menu by pressing the 

 button.

1 Press  , enter 851 using the keypad.
2 Select  NORMAL or THICK with the buttons 

and  .

3 Confirm your choice by pressing the OK button.

4 Exit this menu by pressing the 

 button.

The  Automatic selection can have two meanings 
depending on the paper size defined for the paper trays. 
The following table describes the different cases.

1 Press  , enter 852 using the keypad.
2 Select the default paper tray to use, AUTOMATIC

or MANUAL, with the buttons   and  .

3 Confirm by pressing the OK button.

4 Exit this menu by pressing the 

 button.

If you want to, you can offset the lateral margins of the 
document to the left or right during the scanning from the 
document glass.

1 Press  , enter 854 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm 

steps) with the buttons   and  .

3 Confirm by pressing the OK button.

4 Exit this menu by pressing the 

 button.

If you want to, you can offset the lateral margins of the 
document to the left or right during printing.

1 Press  , enter 855 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm 

steps) with the buttons   and  .

3 Confirm by pressing the OK button.

4 Exit this menu by pressing the 

 button.

Default tray

Tray used for copy

Selection between the 
main tray and the 
manual tray.

The manual tray is 
used.

AUTOMATIC The main tray is used.

The manual tray is 
used.