Xerox 123 User Guide

This section provides the full listing of the items that can be set for each port through 
CentreWare Internet Services.
For a description about each item, refer to the CentreWare Internet Services chapter of 
the User Guide. Refer to [Properties] > [Protocol Settings] or [Port Settings] for links to 
each page.
NOTE: The following items display only if the port is activated. To activate a port 
through CentreWare Internet Services, select [Port Status], and then the required port.

Ethernet – page 102
Parallel – page 103
USB – page 103
EtherTalk – page 104
SMB (Microsoft Networking) – page 104
NetWare – page 105
TCP/IP – page 106
LPD and Port9100 – page 107
SNMP – page 107
IPP – page 108
E-mail – page 109
HTTP – page 110
UPnP – page 110
SSDP – page 111
LDAP – page 111

This page allows you to configure the Ethernet settings for the following options.
NOTE: Some settings on this page will only be available after you restart CentreWare 
Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Port Settings] 
folder.

Select [Ethernet].

Set up the following option to be displayed in the frame.

• Ethernet Settings

Select [Apply New Settings] to reflect the new setting.

Enter the user ID and password then select [OK].