Xerox 123 User Guide

In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol 
Settings] folder.

Select [SMB].

Set up the following options to be displayed in the frame.

• Workgroup

• Host  Name

• Maximum Sessions

• TBCP Filter (Only available when the optional PostScript Kit is installed.)

• Unicode Support

• Auto Master Mode

• Encrypt Password

Select [Apply New Settings] to reflect the new setting.

Enter the user ID and password then select [OK].

NOTE: The default user ID is "11111" and the default password is "x-admin".

When the reboot message appears, select [Reboot].

NOTE: For more information about the contents of items, refer to the CentreWare 
Internet Services chapter of the User Guide.

This page allows you to configure the NetWare settings for the following options.
NOTE: Some settings on this page will only be available after you restart CentreWare 
Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol 
Settings] folder.

Select [NetWare].

Set up the following options to be displayed in the frame.

• Host  Name

• Active Mode

• File  Server  Name

• Polling Interval

• Number of Searches

• Password

• Re-enter Password