Xerox 123 User Guide

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol 
Settings] folder.

Select [SNMP].

Set up the following options to be displayed in the frame.

• Community Name (Read Only)

• Community Name (Read/Write)

• Community Name (Trap Notification)

• System Administrator

Select [Apply New Settings] to reflect the new setting.

Enter the user ID and password then select [OK].

NOTE: The default user ID is "11111" and the default password is "x-admin".

When the reboot message appears, select [Reboot].

NOTE: For more information about the contents of items, refer to the CentreWare 
Internet Services chapter of the User Guide.

This page allows you to configure the IPP settings for the following options.
NOTE: Some settings on this page will only be available after you restart CentreWare 
Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol 
Settings] folder.

Select [IPP].

Set up the following options to be displayed in the frame.

• Port Number

• Add  Port  No.

• TBCP Filter (Only available when the optional PostScript Kit is installed.)

• Administrator Mode

• DNS

• Connection Time-Out

Select [Apply New Settings] to reflect the new setting.

Enter the user ID and password then select [OK].

NOTE: The default user ID is "11111" and the default password is "x-admin".