Xerox 123 User Guide
Scan using Template (Network Scanning) Setup
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide
131
NOTE: Use CentreWare Internet Services to register the IP addresses which are not
allowed to access the machine. Refer to the CentreWare Internet Services chapter of
the User Guide.
allowed to access the machine. Refer to the CentreWare Internet Services chapter of
the User Guide.
14.
When you have finished establishing TCP/IP, select [Close] from the [Protocol
Settings] screen.
Settings] screen.
Remote Authentication Setup (If Required)
The machine uses Kerberos for windows and Kerberos for Solaris for user
authentication. When enabled, user access to scanning features (excluding scan to
mailbox) will be constrained. A popup message will prompt the user to enter a login and
password before using the scanning features. The login and password will be passed
to the Kerberos server. Only when the user is authenticated the feature will be made
available.
authentication. When enabled, user access to scanning features (excluding scan to
mailbox) will be constrained. A popup message will prompt the user to enter a login and
password before using the scanning features. The login and password will be passed
to the Kerberos server. Only when the user is authenticated the feature will be made
available.
Information Checklist
When using Scan to email, Kerberos authentication has the following affect on the
feature:
feature:
1.
Selects [Scan to Mailbox].
2.
A login/password popup is displayed requiring the user to provide a username
and password to the Kerberos server. Enter the login and password.
and password to the Kerberos server. Enter the login and password.
The device passes the login and password to the Kerberos server and if a match is
found, the user is succesfully authenticated.
"From:" field of the e-mail is automatically populated with the device login name and e-
mail address created at the time of the device configuration.
If SMTP server requires authentication, the device will use the SMTP username/
password created at the configuration of the device before sending an e-mail to the
server.
found, the user is succesfully authenticated.
"From:" field of the e-mail is automatically populated with the device login name and e-
mail address created at the time of the device configuration.
If SMTP server requires authentication, the device will use the SMTP username/
password created at the configuration of the device before sending an e-mail to the
server.
Item
By
An existing operational network utilizing TCP/IP is required.
TheseProcedures are not designed to install a network
TheseProcedures are not designed to install a network
Customer
Obtain and record the following information:
• Remote Server IP address
• Remote Server Server Name
• DNS Address if Host Name is used instead of the IP address
name
• Remote Server Realm Name
Customer