Xerox 123 User Guide

To send the scanned document to a server, configure the following settings on the 
machine:

Network Communication Setup
By using the touch screen, activate the FTP Client or SMB port to [Enabled].
Then, set the IP address.

Workstation Setup
Create a shared folder on your computer.

NOTE: CentreWare Internet Services can also be used to configure the machine. 
Refer to the CentreWare Internet Services chapter of the User Guide.

NOTE: Keep the SNMP port enabled while you use the machine on the TCP/IP 
network.

Initially, activate the port.

Connect the machine to the network.

Display the [System Settings] screen.

NOTE: For more information about how to display the [System Settings] screen, refer 
to the Setups chapter of the User Guide.

Select [Network Settings].

Select [Port Settings]. 

Select the required port and then [Change Settings].

Using FTP server:[FTP Client]
Using SMB server:[SMB]

Select [Port Status] and then [Change Settings].

Select [Enabled] and then [Save].

Next, establish TCP/IP

Display the [System Settings] screen 

NOTE: For more information about how to display the [System Settings] screen, refer 
to the Setups chapter of the User Guide.

Select [Network Settings].

Select [Protocol Settings].

Select [TCP/IP - Get IP Address], then [Change Settings].