Xerox 123 User Guide
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide
41
3 NetWare
This chapter explains how to install the machine onto a NetWare network. The following
information is provided.
Information Checklist – page 41
NetWare Environments – page 42
NetWare Installation – page 43
Installation Procedure – page 43
Network Communication Setup – page 43
NetWare Setup – page 44
Workstation Setup – page 45
Test Print – page 45
information is provided.
Information Checklist – page 41
NetWare Environments – page 42
NetWare Installation – page 43
Installation Procedure – page 43
Network Communication Setup – page 43
NetWare Setup – page 44
Workstation Setup – page 45
Test Print – page 45
Information Checklist
Before installing the machine onto a network, make sure that the following items are
available or have been performed.
available or have been performed.
If problems arise during the machine installation, refer to the Problem Solving chapter
for assistance.
for assistance.
CAUTION: Do not connect the network cable to the machine until instructed to
do so.
do so.
Item
By
An existing operational NetWare network is required. These procedures
are not designed to install a NetWare network.
are not designed to install a NetWare network.
Customer
NetWare versions 3.x, 4.x, 5.x or 6.x.
Customer
Obtain and record the following information, if required:
• IP address
• Gateway address
• Subnet mask
• Host name
Refer to the glossary for additional information about the Gateway
Address and Subnet mask, if needed.
• IP address
• Gateway address
• Subnet mask
• Host name
Refer to the glossary for additional information about the Gateway
Address and Subnet mask, if needed.
Customer
Test the machine to make sure that it is installed fully and functioning
correctly.
correctly.
Customer
Install the print driver.
Customer