Xerox 123 User Guide

When you have finished establishing TCP/IP, select [Close] from the [Protocol 
Settings] screen.

This section explains how to change the workstation OS for Solaris, SunOS, and HP-
UX workstations. Refer to the relevant instructions below.
Solaris – page 51
SunOS – page 52
HP-UX – page 53

A printer name for the logical printer should correspond to the print language/mode to 
be used for printing, or to the Logical Printer Number which was registered through 
CentreWare Internet Services. 

*: Requires PostScript Option Kit
You can also add output parameters to the above printer name. The parameters are 
the same as those for -C option. Insert “_” between the printer name and output 
parameter, for example “PS_A4”.
NOTE: If specifying a different printer name, the print language or mode specified on 
the touch screen of the machine is used.

NOTE: When setting print languages/modes from the same workstation to a single 
printer, it is recommended to set one kind of each. If two or more kinds of languages/
modes are set, the workstation may display the same job number for some queies 
(lpq).

PS*

PostScript

PSASC/PSA*

PostScript

PSBIN/PSB*

PostScript

PCL

PCL

LP

Print language specified on the touch screen of the machine.

DUMP/DMP

Dump mode

AUTO/ATO

Auto detection mode

TIFF/TIF

TIFF direct print

TIFF%n

TIFF (%n: Logical Printer Number 1 to 10 which were 
registered through CentreWare Internet Services.)

PS%n*

PostScript (%n: Logical Printer Number 1 to 10 which were 
registered through CentreWare Internet Services.)