Xerox 123 User Guide

NOTE: If several parameters are specified in an lpr command, data may not print 
correctly.

NOTE: The system default is used if no parameter is specified.

NOTE: If the print data specifies double-sided or single-sided printing, those 
specifications take priority over any -C option.

Specifying collation
The following parameter can be specified.

NOTE: For some print languages, the collation parameter may be invalid.

Specifying color and print modes
The following color and print mode parameters can be specified.

A3T/a3t

Double-sided printing on A3 (297 × 420 mm/11.7 × 16.5 
inches) paper and short-edge binding

A4D/a4d

Double-sided printing on A4 (210 × 297 mm/8.3 × 11.7 
inches) paper and long-edge binding

A4T/a4t

Double-sided printing on A4 (210 × 297 mm/8.3 × 11.7 
inches) paper and short-edge binding

B4D/b4d

Double-sided printing on B4 (257 × 364 mm/10.1 × 14.3 
inches) paper and long-edge binding

B4T/b4t

Double-sided printing on B4 (257 × 364 mm/10.1 × 14.3 
inches) paper and short-edge binding

A5D/a5d

Double-sided printing on A5 (148 × 210 mm/5.8 × 8.3 
inches) paper and long-edge binding

A5T/a5t

Double-sided printing on A5 (148 × 210 mm/5.8 × 8.3 
inches) paper and short-edge binding

B5D/b5d

Double-sided printing on B5 (182 × 257 mm/7.2 × 10.1 
inches) paper and long-edge binding

B5T/b5t

Double-sided printing on B5 (182 × 257 mm/7.2 × 10.1 
inches) paper and short-edge binding

COLLATE/collate

Sorts prints electronically.

CC/cc

Selects color for color mode and quality priority for print mode.