Xerox 123 User Guide

For Windows 95/Windows 98/Windows Me, enter the password (SMB 
Administrator Password) only. For Windows NT 4.0/Windows 2000/Windows XP, 
enter the user name (SMB Administrator Name) and password (SMB 
Administrator Password).
Then, click [OK]. The [admintool] folder will be opened.

NOTE: The factory default for the System Administrator Name is [11111], and the 
default System Administrator Password is [x-admin]. The password is case sensitive. 
You are advised to change the name and password from the defaults.

Open [config.txt] using a text editing application, for example Notepad.

NOTE: [config.txt] can also be changed from CentreWare Internet Services.

Make changes to the appropriate items, and then save and close [config.txt].

NOTE: For more information about [config.txt], refer to Setting Format of config.txt on 
page 76.

The [message.txt] file is then created inside the [admintool] folder.

Open [message.txt] and check that it displays the information shown in the 
following table.

NOTE: If [message.txt] is not displayed, select [Refresh Status] from the [View] menu. 
If an error message appears, check the information has been set correctly in 
[config.txt].

Close [message.txt].

Switch off the machine. After the display on the touch screen clears, switch on the 
machine again.

NOTE: The changes you have made will be enabled either after switching off and on, 
or after saving [config.txt] with its Reboot option set to [Yes].

Printer Language Language to be used

English

English

Host Name

Host name of the machine

Maximum 
15 bytes

FX-xxxxxx 
(xxxxxx: last 6 
characters of the 
MAC address of 
the machine)

Workgroup

Name of printer workgroup

Maximum 
15 bytes

WORKGROUP

NetBEUI

Activation of NetBEUI protocol

On/Off

On

TCP/IP

Activation of TCP/IP protocol

On/Off

On