Xerox 4150 User Guide

This procedure describes how to install Print Drivers using the Print Driver CD.

refer to the System Administration CD for full details.
The Print Drivers are on the Print Driver CD that was delivered with your WorkCentre. 
You can use the CentreWare Print and Fax Drivers CD to install multiple components such 
as printer drivers, user documentation and PPDs (PostScript

®

 Printer Description) at the 

same time. To use the installer, load the CentreWare Print and Fax Drivers CD-ROM 
delivered with your WorkCentre.

At the client workstation insert the Driver CD into the CD drive.

If the CD does not start automatically, go to the Start menu, select Run and browse to the 
CD drive. Select Setup and click OK. Click OK to start the installation procedure.

Select the language for the installation and select Continue. The driver screen is 
displayed.

Select Install Drivers.

Select Install Print Drivers.

To install the PCL 5 or PCL 6 Print Drivers, select Option and check the boxes for the 
drivers required.

Enter the Printer’s IP address, DNS name or UNC path for the WorkCentre.

Select Install.

Follow the on screen messages to complete the installation.

When the Print Driver is successfully installed, either send a test print from the print driver 
or submit a job to the WorkCentre.

If the printing operation is successful, continue on to the next setup procedure in this 
document. If the print operation failed, refer to Troubleshooting on page 31.
For a full explanation refer to the System Administration CD that accompanied your 
WorkCentre.