Xerox 450c Reference Guide
q
Check off the box after each Step is completed.
1.
q
Remove all paper and the clear plastic Printer
Output Tray in front of the paper tray. (See Figure 1)
2.
q
Insert approximately a ¼ inch thick stack of
20 lb. paper (measure it) into the Paper Tray.
3.
q
Insert the Feed Roll Cleaning Pad (provided in
Kit) in front of the paper stack (Long-Edge-Down) with
the green side (coarse side) facing out.
the green side (coarse side) facing out.
Page 1 of 2
NOTE: Good lighting is required in order to
see inside the WorkCentre 450
c
/ 450
cp
F
ü
CUSTOMER SELF SERVICE
Figure 1. Inserting the Feed Roll Cleaning Pad
into the Paper Tray
into the Paper Tray
Step 1:
Remove all
paper and the
clear plastic
Printer Output
Tray
Remove all
paper and the
clear plastic
Printer Output
Tray
Bottom of
Paper Tray
Paper Tray
Printer Output
Tray
Tray
Step 2:
Insert approximately a ¼
inch thick stack of paper
into the Paper Tray and
insert the Feed Roll
Cleaning Pad in front of the
paper stack with the green
side facing out
Insert approximately a ¼
inch thick stack of paper
into the Paper Tray and
insert the Feed Roll
Cleaning Pad in front of the
paper stack with the green
side facing out
¼ inch Paper
Stack
Stack
Feed Roll
Cleaning Pad
with the green
side facing out
Cleaning Pad
with the green
side facing out
3 Feed Rolls are in
front of the Pad
front of the Pad
(continued)
Xerox -
DOCUMENT
WorkCentre
450
c
/ 450
cp
Feed Roll Cleaning Kit
The purpose of the instructions is to provide a step by step procedure to correct a paper feed problem. Read all
the instructions before performing this procedure.
the instructions before performing this procedure.
CUSTOMER PREPARATION:
•
Unpack the repair kit and read the Repair Instructions.
Contents of kit:
• Feed Roll Cleaning Pad
• Repair Instructions
DRB-FILE
709P00850 Rev A
March 2000