Xerox 7132 User Guide

- Notification event

Select [Apply] to reflect the new setting.

Enter the user ID and password then select [OK].

NOTE: The default user ID is "11111" and the default password is "x-admin".

When the reboot message appears, select [Reboot Machine].

NOTE: For more information about the contents of items, refer to the CentreWare 
Internet Services chapter of the User Guide.

This page allows you to configure the IPP settings for the following options.
NOTE: Some settings on this page will only be available after you restart CentreWare 
Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol 
Settings] folder.

Select [IPP].

Set up the following options to be displayed in the frame.

• Port Number – The default IPP port number 631 will be displayed. This is a 

display-only item.

• Add Port No. – Enter the port number.
• TBCP Filter (Only available when the optional PostScript Kit is installed.)
• Administrator Mode – Allows you to enable or disable the Administrator Mode.
• DNS – Allows you to configure whether to enable/disable DNS.
• Connection Time-Out – Allows you to specify the connection time-out period 

when transmission fails.

Select [Apply] to reflect the new setting.

Enter the user ID and password then select [OK].

NOTE: The default user ID is "11111" and the default password is "x-admin".

When the reboot message appears, select [Reboot Machine].

NOTE: For more information about the contents of items, refer to the CentreWare 
Internet Services chapter of the User Guide.