Xerox pe16 User Manual

P

APER

 H

ANDLING

3.4

• Make sure that there is no exposed adhesive material 

between labels. Exposed areas can cause labels to peel off 
during printing, which can cause paper jams. Exposed 
adhesive can also cause damage to machine components.

• Do not load a sheet of labels through the machine more than 

once. The adhesive backing is designed for one pass through 
the machine.

• Do not use labels that are separating from the backing sheet 

or are wrinkled, bubbled, or otherwise damaged.

 Do not use Carbonless paper and Tracing paper. They 

could make smell of chemicals and damage your printer. 

The machine has two output locations; the rear output slot (face 
up) and the front output tray (face down). 

To use the front output tray, make sure that the rear cover is 
closed. To use the rear output slot, open the cover.

• If paper coming out of the front output tray has problems, such 

as excessive curl, try printing to the rear output slot.

• To avoid paper jams, do not open or close the rear cover while 

the machine is printing.

Front output

tray

Rear output slot