Xerox XK25C User Guide

Page of 100
12
Getting Started
Installing & Aligning the Ink Cartridges 
(continued)
5
Unpack the black ink cartridge. Remove the sealing tape.
NOTE: Hold the cartridge carefully. Do not
touch the electrical contacts on the side and
bottom of the cartridge. Ensure that there are
no pieces of tape remaining on the cartridge.
6
Insert the black cartridge down into the
cartridge holder on the right side of the carrier assembly. Push the
cartridge toward the back of the machine until it snaps into place.
7
Unpack the color ink cartridge. Remove the sealing tape.
8
Insert the color cartridge down into the
cartridge holder on the left side of the carrier
assembly. Push it toward the back of the
machine until it snaps into place.
9
Close the cartridge compartment lid/support
and scanner module.
10
The 
  L-C  
 message (left cartridge) still appears in the Display. Press
Start to indicate you have just installed the color ink cartridge in the left
cartridge holder. Pressing Stop indicates that a new color ink cartridge
was not installed (this avoids the alignment procedure).
11
The 
  r-C  
 message (right cartridge) will appear in the Display. Press
Start to indicate you have just installed the black Ink cartridge in the right
cartridge holder. Pressing Stop indicates that a new black Ink cartridge
was not installed (this avoids the alignment procedure).
Ä