Xerox XK25C User Guide
Maintenance
50
8
Insert the ink cartridge in the cartridge holder, then push the ink cartridge
firmly to the rear of the machine until it snaps into place.
firmly to the rear of the machine until it snaps into place.
If the ink cartridge moves loosely in the carrier, it has not snapped into
place. Repeat this step.
place. Repeat this step.
9
If you changed the left cartridge (color) press Start, otherwise press
Stop. The message will then change to
Stop. The message will then change to
r-C
. If you changed the right
cartridge (black) press Start, otherwise press Stop.
If you pressed Start to either of the two LED messages, the alignment
procedure will start. An alignment test pattern sheet will print during
which time the LED display will show
procedure will start. An alignment test pattern sheet will print during
which time the LED display will show
L-P
.
10
Close the cover and proceed to the Cartridge Alignment procedure. Use
that particular procedure named To Align the Cartridge Using the
WorkCentre Control Panel, starting with step 4.
that particular procedure named To Align the Cartridge Using the
WorkCentre Control Panel, starting with step 4.
NOTE: If you are interrupted and leave the print carrier in the left side access
location for more than 30 minutes, the print cartridge carrier moves to the
standby position.
location for more than 30 minutes, the print cartridge carrier moves to the
standby position.