Xerox pro 16p User Guide
14
Loading Paper
will flash in the copy quantity display and the green indicator in the copier diagram will flash
when:
•
a paper tray is empty.
•
paper misfeeds: paper has not fed all the way into the copier.
•
a paper tray is not closed properly.
If the paper has misfed, open the paper tray indicated by the flashing green light on the copier
diagram and remove the misfed paper.
diagram and remove the misfed paper.
•
Do not reuse the misfed paper.
•
Ensure that the paper is under the corner snubbers.
•
Close the paper tray.
•
If copying, press the Start key to make the remaining copies.
•
If printing, the job will automatically resume when paper is added.
1. Lift and pull open the paper tray.
2. Push down on the pressure plate until it locks in
position.
Note: The procedures for loading paper into tray 1 and
tray 2 are identical.
tray 2 are identical.
3. Adjust the paper guides to the desired paper size.
•
Squeeze the side guide.
•
Lift and insert the rear guide.
•
When adding paper larger than 8.5
×
11/A4, remove
the rear guide and store it in the pocket in front of the
side guide.
side guide.